Mazzer Philos Single Dose Coffee Grinder

• Single dose design with negligible grounds retention, so you can switch origins or brew methods without wasting coffee
• Vertically oriented 64mm flat burrs with an engineered pre-breaker and a geometrically optimized grinding duct that control popcorning and feed the chamber at a constant rate
• Choose your burr set at order: I200D for flavor clarity, bright acidity and fruit, or I189D for full bodied, syrupy extractions and traditional Italian espresso
• Grind adjustment ring at the rear, with stepped increments as small as 6 microns covering espresso through batch brew on a single dial
• Convertible to fully stepless adjustment using the procedure in the user manual
• Front access grinding chamber: pull the magnetic front plate, unscrew the wing nuts by hand, then clean and refit the burr carrier without losing your grind setting
• Dose finisher tool clears the last grounds from the outlet chute and stores in its own slot behind the front plate
• Stainless steel canister fits 58mm portafilters and is held in position by neodymium magnets, with an optional 53mm canister available
• Runs without the hopper: feed up to 24 g of beans directly and still close the slide
• Asynchronous motor, tight tolerances and an integrated vibration damping system keep it quiet and stable through long sessions
• Optimized to reduce electrostatic charge in the ground coffee, which keeps the counter clean
• Factory seasoned burrs are stable from the first dose. Discard the first 50 g and you are ready to brew
• Stainless steel burrs and a moisture safe path through the grinder, bearings included, so RDT is safe to use
• Microswitch beneath the body and thermal overload protection cut power to the motor, keeping the grinder safe even with the hopper removed
• Every unit is checked for perfect burr parallelism with surface comparators before it leaves the factory
• 14 and one quarter inches tall and 6 inches wide so it fits under a standard upper cabinet, with a power cord you can shorten and store inside the base

• Burrs: 64mm stainless steel flat burrs, I200D (clarity) or I189D (body)
• Burr Speed: 1,400 RPM (50 Hz) / 1,600 RPM (60 Hz)
• Grind Adjustment: Stepped or stepless micrometrical, adjustment ring at the rear
• Stepped Increment: 6 microns per click
• Dial Ranges: 10 to 40 espresso, 50 to 80 moka, 80 to 120 filter
• Hopper Capacity: 60 g (2.1 oz)
• Canister Capacity: 60 g, fits ø58mm portafilters
• Maximum Daily Output: 2 kg (4.4 lbs) of ground coffee
• Power: 400 W
• Volts: 120
• Plug Type: NEMA 5-15P
• Noise Level: 74 dB(A) ± 2.2, per Mazzer, at 240 minutes of operation per 8 hours
• Body Material: Anodized aluminum
• Dimensions (W x H x D): 6 x 14.25 x 14 in (153 x 361 x 351 mm)
• Net Weight: 27.5 lbs (12.5 kg)
• Minimum Clearance: 6 in (15 cm) at each side, front open
• Colors: Anodized Black, Anodized Silver
• Certifications: ETL (Intertek), NSF, CE, CCC, KC, VDE
• Country of Origin: Italy (Made in Venice)

How do I adjust the grind setting?
The Philos features a wide adjustment dial that covers all grind settings from espresso to batch brew in a single rotation. Each stepped click corresponds to 6 microns of adjustment, making it easy to dial in and repeat your recipes. You can also convert the grinder to stepless mode for infinite adjustment granularity.

Can I clean the grinder without losing my grind setting?
Yes. The grind setting is controlled by the adjustment ring on the back burr carrier, so it is unaffected by cleaning. Simply remove the magnetic front plate, unscrew the two wing nuts by hand, and pull out the burr carrier to access the grinding chamber. Reinstall everything and your setting is exactly where you left it.

Can the grinder operate without the hopper?
Yes. You can feed beans directly into the grinder without the stainless steel hopper. The opening accepts up to approximately 24 g of coffee with the slide still closable. The hopper also doubles as a convenient funnel for filling the canister while weighing your dose.

What portafilter sizes does the canister fit?
The included canister is designed for 58mm portafilters. An optional canister for 53mm portafilters is available separately.

What is the Dose Finisher and how do I use it?
The Dose Finisher is a cleaning tool that sweeps ground coffee residue from the outlet chute after grinding. With the motor still running, insert it fully into the chute and rotate clockwise and counterclockwise until no more grounds are discharged. When not in use, it stores magnetically in a dedicated slot behind the front plate.

What is the difference between the I200D and I189D burrs?
The I200D burrs produce outstanding flavor clarity with bright, fruity notes and pleasant acidity. They are best suited to light to medium roasts and all brewing methods. The I189D burrs are based on the iconic Mazzer Mini design and deliver full-bodied, syrupy extractions with low acidity and high body, making them ideal for medium to dark roasts and traditional Italian espresso.

Are the burrs compatible with all brewing methods?
Yes. Both the I200D and I189D burrs are designed for multipurpose use and perform well across all extraction methods, including espresso, moka, filter, and batch brew.

Do I need to season the burrs before use?
No seasoning period is required. Philos burrs have a dedicated surface finishing applied at the factory that makes them stable and ready to use from day one. Discard only the first 50 g of ground coffee before brewing.

Can the Philos be converted to stepless grinding?
Yes. The Philos ships in stepped mode and can be converted to fully stepless operation. The procedure is described in the user manual and involves removing the calibration block, the adjustment disk and the three spring plungers behind it.

What safety features does the Philos have?
The Philos includes both electronic and mechanical safety systems. A microswitch beneath the body cuts power to the motor when the hopper is removed. A thermal overload protection also shuts off the motor if it overheats due to jammed burrs or other anomalies.

Is the Philos RDT (Ross Droplet Technique) compatible?
Yes. The burrs and all internal coffee-contact surfaces are made from stainless steel, which is moisture-resistant. The grinder has also been optimized to reduce electrostatic charges during grinding, and Mazzer recommends using the included canister to collect grounds for best results.

What is the Philos made of?
The body is anodized aluminum. Internal components include stainless steel and brass. All parts that contact coffee are certified food-safe.

• Mazzer Philos grinder
• Stainless steel hopper with lid
• Stainless steel dosing canister (ø58mm portafilter compatible)
• Dose Finisher (outlet duct cleaning tool)
• Cleaning brush
• Power cord (internally storable)
• User manual

The Mazzer Philos is covered by a 12 month parts warranty.

Contact us with your proof of purchase to start a warranty claim and we will take it from there.

• Mazzer Philos User Manual
• Mazzer Philos Brochure